GTO PRO 2000XL SINGLE SWING GATE OPERATOR PACKAGE **Includes one free remote and receiver** Start Price USD 399.95 Current Price USD 399.95 Time Left 22 days 46 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, September 24, 2008 End Time Tuesday, December 23, 2008 Location Heath, Texas See more about 'GTO PRO 2000XL SINGLE SWING GATE OPERATOR PACKAGE' Description GTO/PRO 2000XL AC Charged Single Opener is designed for residential gates within the weight and length specifications of: Max length of 12 ft. and Max weight of 400 lbs. **Package includes: operator arm, control board, box, ac charger, receiver and one remote*** **Options: -RB741 Extra Remote  -F310 Wireless Keypad  -Metal Gooseneck stand for Keypad -Driveway Wand Sensor Emx CS 202 -Nir Photo Safety Eye -F3100MBC Wireless Intercom/Keypad  -F4100MBC Estate Wireless/Keypad ** The GTO/PRO 2000XL Single Opener can be used in residential applications including automating gates made of farm tubing, steel, aluminum, wood, and chain link, along with many other gate types. This opener can be set on the left or right and is used in the standard pull-to-open operation. By adding the push-to-open bracket (347IH) (not included) the GTO/PRO 2000XL can be used to push the gate open away from the property with the arms still mounted on the inside.  The GTO/PRO 2000XL Single Opener is a low voltage system, eliminating the need to run expensive 110 volt AC power wire to your gate. Simply run 16-gauge low voltage 2-conductor wire to a household outlet within 1000’ of the operator or use a solar panel within 200' using the same wire. With the GTO/PRO 2000XL’s oversized control box you can house (2) 7 amp/hour batteries to accommodate higher opening cycle situations and extra storage for solar. (Second battery is not included). The GTO/PRO 2000XL Single Opener features: Soft Start/Soft Stop – Soft start/soft stop is a feature in which the control board, during the set up process, learns where your opening and closing points are for the swing of the gate. Then during normal operation the gate operator automatically slows the motion of the gate to smoothly meet with the gates destination point. This feature can also be turned off. Closing Timer – Set your gate to close between 0 and 120 seconds after reaching the full open position or turn this option off to leave it open until an entry device activates closing motion.  Learn Mode – With the GTO/PRO 2000XL the learning process, the end points are determined by the user via remote. A simple press of the transmitter tells the opener where to stop and when the opener is set to the desired stop points, save the settings on the board. Oversized Control Box Housing – The GTO/PRO 2000XL's oversized control box can house (2) 7 amp/hour batteries and is rated for outdoor use. The GTO/PRO 2000XL Single Opener can be used with GTO Inc.’s complete line of accessories including keypads, transmitters, exit wands, gate locks, solar panels, and more. Gate operator installations should be completed by a qualified installer only. Prooperators/Gates R Us assumes no liability if product is installed incorrectly. Please see owners / installation manual for further details. ** FLAT SHIPPING RATE TO CONTINENTAL US ONLY (EMAIL FOR RATES FOR ALASKA, HAWAII AND PUERTO RICO) Place a Bid!