Inground Pool and Spa Finish -- EVM Pool Coating Green Building Technology - Interior Finishes for Pools Start Price USD 2,625.00 Current Price USD 2,625.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Monday, September 29, 2008 End Time Thursday, October 09, 2008 Location Sacramento, CA See more about ' Inground Pool and Spa Finish -- EVM Pool Coating ' Description THIS POOL WAS BUILT WITH THE INSULATED POOL SYSTEM.  It has a 420 square feet of water surface area and 750 square feet of wall and floor surface area.  AN ELASTAMERIC VARIABLE MEMBRANE (EVM) Copolymer Coating was used as the interior finish.   EVM Coatings were developed to overcome one of the inherent deficiencies in conventional surface coatings -- that is to provide film continuity in the event of an existing or developing cracks in a masonry surface.  EVM coatings completely seal surface porosity and cracks.  That means leak proof!   Our 30 years of experience indicates that EVM coatings can be applied by spray-on or roll-on to virtually any dry, clean porous substrate and clean, hard surfaces.  This includes concrete, masonry, stucco, plasters, sheetrock, stainless steel, steel, fiberglass and acrylic.  Proper application over the proper primer insures an adhesion of 20 pounds per square inch and this level assures protection from blistering or de-lamination except in applications, which require vapor transmission through the coating.  In this application, a sealer/primer – Hydrostop 3000 – is rolled on the surface (pools, water tanks, etc.) to seal pores and stop hydro static pressure and vapor transmission.  The EVM coating has a tensile strength of 1500 psi and elongates in excess of two hundred percent at 70°F and remains flexible at temperatures as low as -30°F.  The ability to elongate normally compensates for most structural movement and eliminates the hairline cracks that develop with non-elastic coatings.   Pools and roofs have gone 10 years and more without discoloration.  We have the records.  If desired, the coating may be rejuvenated at anytime by repeating the cleaning and top coat application.  Our product has made pools and roofs watertight for over 30 years.  It makes any pool structure even more effective and durable.  This product comes in white, but can be ordered in any color when a color sample is provided.    With this type of pool finish, you'll reduce your pool maintenance, and there WILL be a noticeable reduction in pool chemical requirements and energy usage, thus helping the environment.  The finish is easily cleaned with simple detergents.  EVM coatings will not allow mildew or mold to grow and is unmarred by most acids, alkalis, solvents, oils and even sea water.  Our coatings have been health approved by state department officials.  This product has been used on new pools and remodels by residential customers to commercial projects including for the US military.   The EVM coating is consistently smooth, no scuffed feet or knees.  It stretchs 200% and is long lasting-attractive with a life expectancy of up to 25 years And is warranteed 20 years by the manufacturer.  Application is easy; usually taking 2 men 1 day prep, 1 day spray with very little masking and very little overyspray.  Drying time for product is 72 hours, approximately.   For any project requiring a flexible, pool coating with excellent waterproofing properties, we suggest considering using the Elastameric Variable Membrane (EVM) Copolymer Coatings.   Customer needs to specify the type of surface to be coated with the EVM coating when ordering (because the appropriate primer used for the different types of surfaces vary). Types of surfaces coverable: *Painted Pools with Chlorinated Rubber Paint Concrete - Plaster - Marcite - Star Brite *New/Clean Concrete *Fiber Glass - Stainless Steel - Aluminum - Epoxy *Rusted Steel *Coating for Salt Exposure (pools near the ocean, using ocean water)   Pool tile can be installed as desired.   Cost includes shipping. Place a Bid!