Outback Power MX60 MPPT Solar Charge Controller NEW! Start Price USD 490.00 Current Price USD 490.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, September 03, 2008 End Time Tuesday, September 09, 2008 Location Corona, CA See more about 'Outback Power MX60 MPPT Solar Charge Controller NEW! ' Description   BRAND NEW, UNTOUCHED OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller If you have any questions Please do not hesitate to call us toll free at 1-888-202-1573. We have charge controllers, wires, batteries, solar panels, wind turbines, inverters, etc.   Description:The OutBack MX60 Maximum Power Point Tracking (MPPT) charge controller enables your PV system to achieve its highest possible performance. Rated for up to 60 amps of DC output current, the OutBack MX60 can be used with battery systems from 12 to 60 V DC with PV open circuit voltage as high as 140 V DC. The MX60's set points are fully adjustable to allow use with virtually any battery type, chemistry and charging profile. The OutBack MX60 allows you to use a higher output voltage PV array with a lower voltage battery - such as charging a 24 V DC battery with a 48 V DC PV array. This reduces wire size and power loss from the PV array to the battery/inverter location and can maximize the performance of your PV system. The OutBack MX60 comes standard with an easy to use and understand display of the PV system’s performance. The four line, 80 character, backlit LCD display is also used for programming and monitoring of the system’s operation. The OutBack MX60 can also be connected to the OutBack MATE system controller and display to allow monitoring from a distant location - up to 1,000 feet away. The MATE also includes an opto-isolated RS 232 port for connection to a PC computer for data logging and system monitoring.   Features: · Active Maximum Power Point· High Operating Efficiency· Battery Voltages from 12 VDC· PV Arrays up to 150 VDC Open Circuit· Negative or Positive Ground· Built-in Data Logging· Temperature Compensation (when equipped with optional RTS - Remote Temperature Sensor)· Standard 2 Year Warranty Specifications:   · Output Current: 60 A DC rated adjustable to 70 A maximum · Nominal Battery Voltage: 12, 24, 32, 36, 48, 54 or 60 V DC (programmable) · PV Open Circuit Voltage (Voc): 120 VDC rated 150 V DC maximum · Standby Power Consumption: 1 W typical · Charging Regulation Methods Five stage:   bulk, absorption, float, silent, equalization · Voltage Regulation Set points: 13-80 V DC · Equalization Voltage: Up to to 5.0 V DC above absorb set point adjustable timer - auto terminate · Temperature Compensation:  -5.0 mV/°C/cell using the optional RTS temperature sensor · Voltage Step-Down Capability: Can charge a 12 or 24 V DC battery from a 48 V nominal PV array · Power Conversion Efficiency: (typical) 99 % @ 50 A output, 48 V battery and 48 V array · Digital Display: 4 line 80 character backlit LCD display (30 different screens of information and settings) · Remote Interface: RJ 45 modular connector CAT 5 cable 8 wire · Operating Temperature Range -40 to 60 °C power derated above 25 °C · Environmental Rating: Indoor type 1 · Conduit Knockouts: Two 1/2” & 3/4” on the back; One 3/4” & 1” on each side; Two 3/4” & 1” on the bottom · Warranty: 2 years parts and labor; optional extended warranty available · Dimensions: 14.5” H x 5.75” W x 5.75” D Shipping is $30 within the United States. Alaska, Hawaii, PR please add $20 more. Canada will be $50 and $90 Anywhere else in the world. Thanks!     Place a Bid!