Raimondi "Bull Dog" Bullnose Machine w/ wheel Start Price USD 1,500.00 Current Price USD 1,500.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, August 27, 2008 End Time Monday, September 01, 2008 Location Brookfield, Wisconsin See more about 'Raimondi "Bull Dog" Bullnose Machine w/ wheel' Description The Original Bull Dog provides over 30 years of Raimondi Innovations and Technology which allow you to fabricate the most professional looking Bullnose on the jobsite. When tile and stone bullnose isn’t available, no worries, “Make It Yourself” using this proven professional technique....The “Bull Dog”, still the undisputed leader of the pack!• For bullnosing and bevelling. Create 1/2 Bullnose, 45° bevel (Jolly) on: marble, granite, porcelain, single and double fired. • Maximum length of bullnose: 24” (60 cm). • Maximum depth of shaping: 5/8” (15 mm). • Maximum shaping radius: 5/8” (15 mm). • Gear ratio of motor to wheel 1 ÷ 1.6. Drive belt type poly V. • Weight: 132 lbs. • Comes with: - 2 Sliding Tables I used this machine for one job and it was a little more machine than I needed.  This is a must have for any tile contractor.  INCLUDED with the machine is the 3/8" first step milling wheel.  The machine with a wheel retails for well over $3000.00.  As this is a heavy, expensive machine I will only ship using a freight service that I have an existing relationship with.  Cashiers check or money order is the preferred method of payment. Place a Bid!