Solar Powered LEDs Matrix Light (x2 Almond)+ Base Stand Start Price USD 115.00 Current Price USD 115.00 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Thursday, August 28, 2008 End Time Thursday, September 04, 2008 Location Temple city, CA See more about 'Solar Powered LEDs Matrix Light (x2 Almond)+ Base Stand' Description Now you are biding TWO Solar Powered LEDs Matrix Lighting System (EE845ESL Color: Almond) +(Green Product Technology)  (Retail:$99.95 each) ONE Plastic Base Stand  (EE845PBS Color: White) This light is perfect match for stucco wall color GENERAL:Introducing a green product designed with the environment in mind. Completely solar powered,the eLEDing consists of a large, high intensity LED matrix (comprised of 45 pieces), combinedwith the ePIR controlling that allows for over 5+  hours in continuous illumination time. It providesmultiple functions in applications for all types of commercial, industrial, and residential buildingsas well – all while conforming to the green sources of energy.   APPLICATIONS: Commercial – Additional solar powered lighting for the lobby, hallway, stairway, or parking lot. Industry – Serves as a bright lighting source projection ideal for video surveillance in hard to spot               places such as loading areas. Residential – Extra safety and security coverage for front doors, garage doors, back yards, pool areas,                   and side walls.In the event of a power outage, the eLEDing becomes an excellent source for                    lighting backup.    FEATURES & BENEFITS:Conserves energy in using the earth’s energy. Indoor and outdoor usage complete with weather proofingEasy set up, free of programming.   SPECIFICATIONS: Detecting Range: up to 30 ft. x 30 ft• Matrix Light: 45 super bright LEDs• Battery: 7.4V 3AH lithium-polymer battery• Solar Charger Board: 10VDC/2.5W Monocrystalline (with 15' cable)• Continuous Illumination Time: Up to 6 hours• Weight: 1.8LBs• Operation Temp.: -25F to +125F• Complies with FCC Part 15 Class B and ICES-003:2004. FUNCTIONS & ADJUSTMENTS•OFF position: No illumination.•AUTO position: Light illuminates based on adjustments for DELAY TIME & AMBIENT LEVEL (recommended position for motion detection).•ON position: Light illuminates continuously.•Battery will be charged in any of the three positions ON,OFF and AUTO.•To illuminate in darkness: Turn the AMBIENT knob towards the right /- (typically set position).•It is recommended to adjust the AMBIENT knob between + and - under various ambient conditions.•To vary DELAY TIME: Turn the DELAY knob to desired time (between 5/- to 60/+ seconds). The light  will illuminate after motion is detected. (If movement is continuous, the delay will be extended until movement stops).•The solar charger board can be adjusted 360o horizontally & 90o backwards. The LED matrix light can be adjusted horizontally 180o forward & 120o backwards.•To perform a walk test: Turn the AMBIENT knob towards the left /+ (daytime only).•The red low battery indicator light in the center area flickers when voltage is below normal operating capabilities.•The light can be placed on the base stand (EE845-PBS) as a table light during travel, recreation, etc or an emergency light during AC power outage.COLORS:Almond Plastic Base Stand   For more info please visit http://www.eLEDing.comFree Shipping USA mainland only, no P.O. Box Address. Place a Bid!