StoneTech Profesional BulletProof Stone Sealer 1 Quart Start Price USD 39.25 Current Price USD 39.25 Time Left - Bid Count 0 Buy It Now Price - Reserve Price - Start Time Tuesday, August 26, 2008 End Time Friday, September 05, 2008 Location chicago,Il See more about 'StoneTech Profesional BulletProof Stone Sealer 1 Quart' Description     Click an Image to Enlarge Description Features:   Features + Benefits Advanced penetrating microbond protection Maximum protection against all stains Makes cleaning stone easier Preserves natural look Water-based low-solids coating Interior & exterior Where to Use Natural stone such as marble, granite, limestone, slate, terrazzo, travertine & sandstone. Best suited for the most porous stone surfaces. Directions Always test in a small inconspicuous area with a 24-hour cure time to determine ease of application and desired results. Allow new grout installations to cure for a minimum of 72 hours prior to application. Make sure surface is clean, dry and free of waxes and coatings. Surface temperature should be between 50°F and 80°F. Ensure that the area is well-ventilated during application and until the surface is dry to the touch. Keep children and pets out of the area until foot traffic resumes. Mask off and protect any baseboards or adjacent areas to avoid splashing sealer onto surfaces not intended to be treated. Sealer may be applied to damp surfaces one hour after standing water has been removed. Liberally apply an even coat using a paint pad, roller or brush. Allow sealer to penetrate the surface for 15-30 minutes. During this time, distribute excess over entire area to ensure even penetration. Remove excess sealer by wiping ntire surface thoroughly with clean, dry towels. A second coat may be needed for porous, absorbent surfaces and should be applied 30-40 minutes after initial application as directed in steps 3-4. A minimum of 15 minutes after final application, wipe entire surface with clean dry towels to remove any excess sealer. If needed to remove residue, reapply a thin coat f sealer, allow to dwell for 2-3 minutes, agitate with a white nylon pad and dry thoroughly with clean, dry towels. A full cure is achieved after 24-72 hours; foot traffic may begin in 6-8 hours. If foot traffic must resume sooner, cover the floor with red rosin paper to protect it until full cure has been achieved. Red rosin paper is not needed to apply second coat. Clean equipment with water. Coverage Quart: 50-400 sq. ft. Expected Wear: 3-5 years on interior surfaces & 1-3 years on exterior surfaces.   Questions If you have any questions email us at sales@dawiff.com Payment We only accept payment through Paypal .We prefer Paypal instant payment. Shipping We ship to the 48 continental United States -  $12.50 Alaska and Hawaii $37.50 Canada Shipping - $50.00 ALL shipments are sent FEDEX (We can not ship to PO Boxes)Buyer is resposible for all broker and custom charges for Canadian Shipments.*Hawaii, Alaska, and  Puerto Rico residents please email for shipping quote. Return Policy Accepted Within 14 days After Shipping. 10% Restocking Fee Place a Bid!