XANTREX Freedom 458 charger/Inverter with REMOTE!!!!! Start Price USD 300.00 Current Price USD 625.00 Time Left - Bid Count 7 Buy It Now Price - Reserve Price - Start Time Monday, September 01, 2008 End Time Saturday, September 06, 2008 Location Page, AZ See more about 'XANTREX Freedom 458 charger/Inverter with REMOTE!!!!!' Description This unit works 100%... It is MODIFIED SINEWAVE…  It was used on a houseboat, and was replaced only because we upgraded to a more powerful “Outback” system.  It comes with an OWNERS MANUAL, and FREEDOM REMOTE ($125.00 value) along with its owners manual… scroll down for remote description… Heart Interface Freedom 458 Inverter/Charger Modified Sine wave ($1640.00 retail)   Description AC Power Inverter with High Surge Capability, 3-Stage Charger With filtered modified sine wave output, Freedom inverter/chargers run virtually anything, from electrical equipment to appliances and electronics in your RV.  Temperature controlled multistage charging ensures that your batteries are recharged quickly, and automatic shutdown and other safety features protect your expensive deep-cycle batteries from excessive depletion. For inverter/charger control and basic system monitoring, use the Freedom Basic Remote. For advanced battery monitoring and remote control, Freedom 458 systems can be paired with optional Link instrumentation. Product Features MSW AC power inverter with high surge capability Automatic 3-stage battery charger Temperature compensation with equalization stage provides optimal charging of deep cycle batteries Built-in transfer switch automatically transfers between inverter power and incoming AC power Power sharing prevents source AC input circuit breaker from tripping Customized settings can be programmed with the Freedom Basic Remote or Link 1000 panels Includes battery temperature sensor Protection Features Over voltage and under voltage protection Over-temperature protection Overload protection Short circuit protection Freedom 458 30-12 Specifications   Electrical Specifications - Inverter   Output power (continuous)   3000 W   Surge power (AC amps)   75 A   Output frequency regulation   60 Hz, quartz regulated   Inverter voltage regulation   120 V +/-5% true RMS   Output wave form   Modified sine wave   Efficiency (full load)   86%   Peak efficiency   93%   No load current draw (idle mode)   0.12 A   AC output connections   Single/Dual (depending on model - see part number section)   AC input connections   Single/Dual (depending on model - see part number section)   AC transfer switch   30 A   Electrical Specifications - Charger   Charge rate   140 A DC   AC input voltage range   90 − 130 VAC   Battery voltage (nominal)   12 VDC   Battery voltage range   10.0 − 15.5 VDC   Low battery cut-out   10.0 VDC   AC input (max. charge mode)   28 A AC   Bulk charge voltage   14.3 VDC (default value varies with battery type & temp.)   Float charge voltage   13.4 VDC (default value varies with battery type & temp.)   Equalize charge voltage   16.3 VDC   Charge control   3-stage   Battery type settings   Wet/Gel 1/Gel 2/AGM   Equalization   Yes   Temperature sensitive charging   Yes   General Specifications   Optimal operating temp. range   32°F − 104°F (0°C − 40°C) *derated below 0°C and above 40°C   Optional remotes   Freedom Basic Remote or Link instrumentation   Dimensions (H x W x L)   7.9 x 11.5 x 13.2” (201 x 292 x 335 mm)   Weight   50 lb (23 kg)           Part numbers   81-3010-12 (single input, single output)       81-3030-12 (dual input, dual output)       84-2056-01 (Freedom Basic Remote)       84-2019-02 (Link 1000)       84-2000-06 (Link 2000)   Regulatory Approvals   UL and cUL listed to 458 standard   XantrexFreedom RemoteBattery Status and Freedom Inverter/Charger Remote Control ($125.00 value) Provides Valuable Inverter/Charger System Monitoring and Control The Freedom Remote Control Panel (part#84-2056-01) allows you to control your Freedom Combi, Freedom 458 and Freedom Marine Series Inverter/Charger system from any convenient location. It is easy to read, operate and install, and all controls can be accessed directly from the front panel. Product Features Independent invert and charge on/off controls Push button control of power sharing, equalizing, battery set-up Multi-colored LED displays battery state of charge, fault conditions, AC input, DC voltage and DC amperage LED warning indictors for low battery and overload warning Splash resistant design Incoming AC breaker selection allows programmable power sharing Easy to install  Specifications Voltage bar graph 10.0 - 15.5 VDC DC amps bar graph Idle mode = off   Loaded = <10 - 300 DC amps Operating temperature range 32° F to 158° F (0° C to 70° C) Compatible battery types wet/gel/AGM Design Splash resistant Dimensions (H x W x L) 5.5 x 3.75 x 1.75" (140 x 95 x 44 mm) Cutout size: (H x W) 4.875 x 2.875" (116 x 73 mm) Weight 3 oz (85 g)     Part number 84-2056-01   Place a Bid!