Xantrex DC Breaker Disconnect DC175 for SW XW Inverters Start Price USD 200.00 Current Price USD 200.00 Time Left 27 days 18 hours 33 minutes Bid Count 0 Buy It Now Price - Reserve Price - Start Time Wednesday, October 01, 2008 End Time Tuesday, December 30, 2008 Location MIami, FL See more about 'Xantrex DC Breaker Disconnect DC175 for SW XW Inverters' Description XANTREX DC Breaker / Battery Disconnect An easy way to isolate inverter and battery Now it's easier to meet National Electric Code requirements with a Trace DC175 or 250. These modules are designed to link with Trace SW and DR series inverter systems. o    Meets National Electrical Code requirement for "means of disconnection." o    No exposed "hot" terminals o    Doesn't need ring terminal lugs Overcurrent protection: DC circuit breakers UL listed for up to 125VDC o    Extremely low voltage drop (less than most fuses or current shunts) o    Rated for interrupting high fault current (up to 25,00 amps at 65 VDC) o    Easy to reset o    No exposed "hot" terminals Room for expansion o    Optional second main breaker accommodates dual inverter systems o    Second breaker can be field installed o    Space allows for DC current shunts Optional bonding block simplifies wiring and grounding o    Bonds negative conductor to grounding system at single point o    Lugs to terminate four 4/0, two #1/0, two #2 and four #4 cables Four Auxiliary breaker positions o    Optional 15-amp DC breaker for small DC loads or equipment room light o    Optional 60-amp DC-rated breaker for PV array disconnect, charge controller, etc. o    UL listed for DC systems up to 125 VDC o    Rated for interrupting high fault current, up to 25,000 amps at 65 VDC o    Easily accessible #10-32 stud terminals   Place a Bid!